CWNP Exam 2024 CWT-101 Dumps Updated Questions UPDATED Oct-2024
Get The Most Updated CWT-101 Dumps To CWT Certification Certification
NEW QUESTION # 77
What does output power control allow you to do in the configuration of an AP?
- A. Change the channel
- B. Increase or reduce the antenna gain
- C. Implement Dynamic Frequency Selection (DFS)
- D. Increase or reduce the output power
Answer: B
NEW QUESTION # 78
A user reports sporadic performance problems with the WLAN. She works near the company lunch room, which has typical kitchen equipment. The problems seem to be worse during the lunch hour.
What is the likely case?
- A. Improper roaming settings
- B. RF interference
- C. Improper band preference settings
- D. Improper security settings
Answer: B
NEW QUESTION # 79
What is the term used to describe the process of configuring a wireless device to join a specific wireless network?
- A. Network join
- B. Security
- C. Provisioning
- D. Channel widths
Answer: A
NEW QUESTION # 80
You are receiving reports from several users that their clients connect with very low data rates. All reports are confined to a particular area in the facility and the users report that the problem does not occur with the same devices in other areas.
What is most likely problem in that area?
- A. Poor signal strength
- B. Improper client security configuration
- C. Improper AP security configuration
- D. High SNR
Answer: A
NEW QUESTION # 81
An AP has two Ethernet ports on the back and another port that looks similar to an Ethernet port.
For most enterprise APs, how many of these ports can be used for Power over Ethernet (PoE)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 82
Which operating system is commonly used on Google's Chromebook devices?
- A. macOS
- B. Linux
- C. Windows
- D. Chrome OS
Answer: D
NEW QUESTION # 83
What is one possible cause of mobility problems in a wireless network if the fast roaming method used by the client is not supported by the access point?
- A. Configuration errors
- B. Improper network settings
- C. Non-implemented roaming features
- D. Unsupported fast roaming methods
Answer: D
NEW QUESTION # 84
What process is used after authentication to generate and install encryption keys on 802.11 devices using WPA2?
- A. 802.1X port-based authentication
- B. 4-way handshake
- C. EAP authentication
- D. Passphrase to PSK mapping algorithm
Answer: B
NEW QUESTION # 85
What protocol is sometimes used to access a network or user directory by a RADIUS server instead of using an internal user database?
- A. NTP
- B. DHCP
- C. LDAP
- D. EAP
Answer: C
NEW QUESTION # 86
Which process in the WLAN connection sequence establishes the encryption keys between the client device and the access point?
- A. Association
- B. Authentication
- C. 4-way handshake
- D. 802.1X/EAP authentication
Answer: C
NEW QUESTION # 87
What can occur when two copies of a signal wave arrive at the receiver at the same time, but 180 degrees out of phase which each other?
- A. Signal nulling or cancellation
- B. Increased signal amplitude
- C. Increased signal strength
- D. Bits may be added to the total count
Answer: A
NEW QUESTION # 88
What is the term used to describe the roaming feature that is not implemented or enabled in a wireless network, causing mobility problems?
- A. Unsupported fast roaming methods
- B. Configuration errors
- C. Improper network settings
- D. Non-implemented roaming features
Answer: D
NEW QUESTION # 89
What term is used to describe the phenomenon of an RF signal bouncing off a surface?
- A. Reflection
- B. Scattering
- C. Gain and loss
- D. Refraction
Answer: A
NEW QUESTION # 90
What does RSSI stand for in the context of RF signals?
- A. Radio signal scattering index
- B. Relative signal strength indicator
- C. Reflection and scattering intensity
- D. Received signal strength indicator
Answer: D
NEW QUESTION # 91
What is the term used to describe the interference caused by multiple access points using the same channel in close proximity?
- A. Feature incompatibility
- B. Configuration errors
- C. Co-channel interference (CCI)
- D. Interference
Answer: C
NEW QUESTION # 92
What AP configuration option is often thought to provide security but actually provides no security because of the simple spoofing attack weakens it?
- A. WEP
- B. SSID hiding
- C. Shared Key Authentication
- D. MAC filtering
Answer: D
NEW QUESTION # 93
What is one possible cause of poor signal strength in a wireless network?
- A. Supplicant issues
- B. Configuration errors
- C. Interference
- D. Low data rates
Answer: D
NEW QUESTION # 94
A user reports that his laptop was rebooted this morning and now he cannot connect to the WLAN.
No other users are reporting connection problems in his work area. No network configuration changes have been made.
Which one of the following is the most likely issue?
- A. The driver was updated and the new version is problematic
- B. Wrong passphrase entered for WPA2 on his laptop
- C. The AP is not allowing his laptop onto the network because it was rebooted and the reboot changed the MAC address
- D. The network SSID has changed
Answer: A
NEW QUESTION # 95
......
CWNP CWT-101 Exam Certification Details:
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Recommended Training | Live Training Class Self-Paced Training Kit Study and Reference Guide Electronic Practice Test eLearning Module eLearning Bundle |
| Sample Questions | CWNP CWT-101 Sample Questions |
CWNP Certified CWT-101 Dumps Questions Valid CWT-101 Materials: https://validexam.pass4cram.com/CWT-101-dumps-torrent.html