[Jun 13, 2025] D-PDD-OE-23 Questions Truly Valid For Your EMC Exam!
D-PDD-OE-23 Actual Questions - Instant Download Tests Free Updated Today!
NEW QUESTION # 81
What is a key consideration when configuring network interfaces on PowerProtect DD?
- A. Interfaces can share IP addresses if masked correctly
- B. Interfaces must be dedicated to either replication or backup
- C. All interfaces must be on the same subnet
- D. All interfaces must operate at the same speed
Answer: B
NEW QUESTION # 82
What should be considered when using replication with Dell EMC Cloud Tier?
- A. Replicated file is placed in a cloud unit first if Cloud Tier is enabled
- B. Cloud Tier-enabled systems must use collection replication
- C. Source system must be running DDOS 5.7 or higher to support replication to the cloud
- D. Replicated file is placed in the active tier first when Cloud Tier is enabled
Answer: D
NEW QUESTION # 83
Select all valid features supported by PowerProtect DD OS 7.4.
- A. Instant Access
- B. SAN Support
- C. Advanced Deduplication
- D. Cloud Tiering
Answer: A,C,D
NEW QUESTION # 84
Select all that apply: What considerations should be made when designing a backup solution with PowerProtect DD?
- A. Rate of data growth
- B. Backup and recovery objectives
- C. Total number of users
- D. Existing network infrastructure
Answer: A,B,D
NEW QUESTION # 85
Which statement about PowerProtect DD replication is correct?
- A. Only supports asynchronous replication
- B. Supports both synchronous and asynchronous replication
- C. Replication must be to the same model
- D. Does not support encrypted replication
Answer: B
NEW QUESTION # 86
What can be used to monitor system utilization?
- A. system status command
- B. Alert Messages
- C. Health tab in the System Manager GUI
- D. system show performance command
Answer: D
NEW QUESTION # 87
Which directories will an administrator have access to immediately after the initial configuration of a PowerProtect DD system?
- A. /data/col1/backup and /ddvar
- B. /usr/local and /home/admin
- C. /ddvar and /var/lib
- D. /data/col1/backup and /var/lib
Answer: A
NEW QUESTION # 88
A backup administrator is using retention lock.
What happens when the retention period expires?
- A. Files can be modified and deleted
- B. Files can be deleted but not modified
- C. Files cannot be modified or deleted until manual unlock
- D. Files can be modified but not deleted
Answer: B
NEW QUESTION # 89
What is the maximum number of concurrently active MTrees that are supported on any PowerProtect DD appliance with DDOS 7.3?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 90
An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.
What is the most likely cause of this behavior?
- A. Migration will restrict all activities on both systems
- B. Source system is running in restricted mode
- C. Filesystem is disabled on source system
- D. Migration will restrict all activities on source system
Answer: B
NEW QUESTION # 91
Select all environments suitable for PowerProtect DD deployment:
- A. Organizations requiring frequent real-time data access
- B. Small businesses requiring low-cost solutions
- C. Data centers needing high availability and disaster recovery solutions
- D. Enterprises with large-scale data needs
Answer: C,D
NEW QUESTION # 92
What is the primary function of PowerProtect DD encryption?
- A. Enhancing data transfer speeds
- B. Reducing the amount of storage used
- C. Increasing backup window times
- D. Complying with legal regulations
Answer: D
NEW QUESTION # 93
A backup administrator is tasked with verifying the compression settings of a DDVE instance.
Which compression algorithm will be enabled by default?
- A. gzfast
- B. lzw
- C. lz
- D. gz
Answer: A
NEW QUESTION # 94
A Spectrum Protect administrator is configuring VTL on PowerProtect DD.
Which tape driver type should they select?
- A. L180
- B. L6000
- C. TS3500
- D. L2000
Answer: C
NEW QUESTION # 95
What is the primary benefit of using DD Boost over standard protocols?
- A. Reduced bandwidth consumption
- B. Lower latency
- C. Easier configuration
- D. Increased security
Answer: A
NEW QUESTION # 96
A customer needs help deploying a shared PowerProtect DD. They ask for best practices when configuring SMT.
What network-related attributes must they configure to increase the security of each tenant unit?
- A. - Tenant Unit IP Addresses
- Tenant Unit Firewall Ports
- Remote Data Access IP
- Addresses Default Gateway - B. - Tenant unit Hostname
- Local Data Access IP addresses
- Remote Data Access IP Addresses
- Default Gateway - C. - Remote Data Access IP
- Addresses Default Gateway
- Tenant Unit Virtual Interfaces
- Tenant Unit Hostname - D. - Local Data Access IP addresses
- Remote Data Access IP Addresses
- Default Gateway
- Tenant Unit Firewall Ports
Answer: B
NEW QUESTION # 97
How does PowerProtect DD support environmental sustainability?
- A. By enabling cloud integration
- B. By reducing physical server footprint
- C. By utilizing recycled materials in hardware
- D. By decreasing power and cooling requirements
Answer: D
NEW QUESTION # 98
A backup administrator is tasked with verifying the compression savings of a PowerProtect DD9900.
Which compression algorithm will they see enabled by default?
- A. gzfast
- B. lzw
- C. lz
- D. gz
Answer: A
NEW QUESTION # 99
Following best practices for a PowerProtect DD CIFS environment, what is the recommended SESSTIMEOUT value in seconds?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 100
Which backup application can back up data to a PowerProtect DD system using DD Boost over FC?
- A. Dell NetWorker
- B. Dell Avamar
- C. IBM Spectrum Protect
- D. Veritas Backup Exec
Answer: A
NEW QUESTION # 101
What information does the daily Autosupport report contain?
- A. System and MTree capacity
- B. MTree capacity and System alerts
- C. Quota alerts and MTree capacity
- D. System and Quota alerts
Answer: D
NEW QUESTION # 102
An IBM Spectrum Protect administrator is configuring a device class with PowerProtect DD.
Following best practices, what is the recommended device type and mount limit?
- A. DISK, 2
- B. FILE, 20
- C. FILE, 2
- D. DISK, 20
Answer: B
NEW QUESTION # 103
......
Get instant access of 100% real exam questions with verified answers: https://validexam.pass4cram.com/D-PDD-OE-23-dumps-torrent.html