Pass NSE5_FAZ-7.2 Exam in First Attempt Guaranteed 2024 Dumps!
NSE5_FAZ-7.2 Dumps Full Questions - Exam Study Guide
Fortinet NSE5_FAZ-7.2 certification exam is an essential credential for professionals who work with FortiAnalyzer 7.2. Fortinet NSE 5 - FortiAnalyzer 7.2 Analyst certification validates an individual's expertise in using FortiAnalyzer to collect, analyze, and report on network security information. By earning this certification, professionals can demonstrate their commitment to ongoing professional development and advance their careers in network security.
NEW QUESTION # 14
You need to upgrade your FortiAnalyzer firmware.
What happens to the logs being sent to FortiAnalyzer from FortiGate during the time FortiAnalyzer is temporarily unavailable?
- A. The logfiled process stores logs in offline mode
- B. FortiAnalyzer uses log fetching to retrieve the logs when back online
- C. Logs are dropped
- D. FortiGate uses the miglogd process to cache the logs
Answer: D
NEW QUESTION # 15
Logs are being deleted from one of your ADOMs earlier that the configured setting for archiving in your data policy. What is the most likely problem?
- A. CPU resources are too high.
- B. The total disk space is insufficient and you need to add other disk.
- C. The ADOM disk quota is set too low based on log rates.
- D. Logs in that ADOM are being forwarded in real-time to another FortiAnalyzer device.
Answer: C
Explanation:
https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FMG FAZ/1100_Storage/0017_Deleted%20device%20logs.htm
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/87802/automatic-deletion
NEW QUESTION # 16
What happens when a log file saved on FortiAnalyzer disks reaches the size specified in the device log settings?
- A. The log file is purged from the database.
- B. The log file is overwritten.
- C. The log file rolls over and is archived.
- D. The log file is stored as a raw log and is available for analytic support.
Answer: C
Explanation:
Reference:
81a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/355632/log-browse
NEW QUESTION # 17
If a hard disk fails on a FortiAnalyzer that supports software RAID, what should you do to bring the FortiAnalyzer back to functioning normally, without losing data?
- A. Take no action if the RAID level supports a failed disk
- B. Replace the disk and rebuild the RAID manually
- C. Hot swap the disk
- D. Shut down FortiAnalyzer and replace the disk
Answer: D
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD46446#:~:text=On%20FortiAnalyzer%2FFortiManager%20devices%20that,to%20exchanging%20the%20hard%20disk.
If a hard disk on a FortiAnalyzer unit fails, it must be replaced. On FortiAnalyzer devices that support hardware RAID, the hard disk can be replaced while the unit is still running - known as hot swapping. On FortiAnalyzer units with software RAID, the device must be shutdown prior to exchanging the hard disk.
NEW QUESTION # 18
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. The received rate is almost at its maximum for this device
- B. Logs are being dropped
- C. The sqlplugind daemon is behind in log indexing by two logs
- D. Raw logs are reaching FortiAnalyzer faster than they can be indexed
Answer: D
NEW QUESTION # 19
Which two methods are the most common methods to control and restrict administrative access on FortiAnalyzer? (Choose two.)
- A. Trusted hosts
- B. Virtual domains
- C. Administrative access profiles
- D. Security Fabric
Answer: A,C
Explanation:
Reference:
https://docs2.fortinet.com/document/fortianalyzer/6.0.0/administration-guide/581222/trusted-hosts
NEW QUESTION # 20
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?
- A. Indicators of Compromise
- B. Log fetching
- C. Log forwarding an aggregation mode
- D. Log upload
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management
NEW QUESTION # 21
What are two advantages of setting up fabric ADOM? (Choose two.)
- A. It can include only FortiGate devices that are part of the same Security Fabric
- B. It can be used to facilitate communication between devices in same Security Fabric
- C. It can be used for fast data processing and log correlation
- D. It can include all Fortinet devices that are part of the same Security Fabric
Answer: C,D
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/448471/creating-a-security-fabric-adom
NEW QUESTION # 22
Which two constraints can impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)
- A. Total quota
- B. Disk size
- C. RAID level
- D. License type
Answer: B,C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/368682/disk-space-allocation
NEW QUESTION # 23
An administrator fortinet, is able to view logs and perform device management tasks, such as adding and removing registered devices. However, administrator fortinet is not able to create a mall server that can be used to send email.
What could be the problem?
- A. A trusted host is configured.
- B. ADOM mode is configured with Advanced mode.
- C. Fortinet is assigned the Restricted_ User administrator profile.
- D. Fortinet is assigned the Standard_ User administrator profile.
Answer: D
Explanation:
* Super_User, which, like in FortiGate, provides access to all device and system privileges.
* Standard_User, which provides read and write access to device privileges, but not system privileges.
* Restricted_User, which provides read access only to device privileges, but not system privileges. Access to the Management extensions is also removed.
* No_Permissions_User, which provides no system or device privileges. Can be used, for example, to temporarily remove access granted to existing admins.
FortiAnalyzer_7.0_Study_Guide-Online page 42
NEW QUESTION # 24
What is the purpose of trigger variables?
- A. To use information from the trigger to filter the action in a task
- B. To store the start times of playbooks with On_Schedule triggers
- C. To display statistics about the playbook runtime
- D. To provide the trigger information to make the playbook start running
Answer: A
NEW QUESTION # 25
View the exhibit:
What does the 1000MB maximum for disk utilization refer to?
- A. The disk quota for all devices in the ADOM
- B. The disk quota for each device in the ADOM
- C. The disk quota for the ADOM type
- D. The disk quota for the FortiAnalyzer model
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/743670/configuring-log-storage-policy
NEW QUESTION # 26
What statements are true regarding FortiAnalyzer 's treatment of high availability (HA) dusters? (Choose two)
- A. FortiAnalyzer distinguishes different devices by their serial number.
- B. FortiAnalyzer receives bgs only from the primary device in the cluster.
- C. FortiAnalyzer only needs to know (he serial number of the primary device in the cluster-it automaticaly discovers the other devices.
- D. FortiAnalyzer receives logs from d devices in a duster.
Answer: A,D
NEW QUESTION # 27
What can you do on FortiAnalyzer to restrict administrative access from specific locations?
- A. Configure an ADOM for respective location.
- B. Configure trusted hosts for that administrator.
- C. Configure two-factor authentication with a remote RADIUS server.
- D. Enable geo-location services on accessible interface.
Answer: B
NEW QUESTION # 28
What happens when the IOC breach detection engine on FortiAnalyzer finds web logs that match a blocklisted IP address?
- A. A new Infected entry is added for the corresponding endpoint.
- B. The detection engine classifies those logs as Suspicious
- C. The endpoint is marked as Compromised and. optionally, can be put in quarantine.
- D. FortiAnalyzer flags the associated host for further analysis.
Answer: C
NEW QUESTION # 29
Which two statements are true regarding FortiAnalyzer log forwarding? (Choose two.)
- A. Both modes, forwarding and aggregation, support encryption of logs between devices.
- B. Forwarding mode forwards logs in real time only to other FortiAnalyzer devices.
- C. In aggregation mode, you can forward logs to syslog and CEF servers as well.
- D. Aggregation mode stores logs and content files and uploads them to another FortiAnalyzer device at a scheduled time.
Answer: A,D
Explanation:
A) FortiAnalyzer_7.0_Study_Guide-Online.pdf page 148: The log communication between devices can be protected by encryption, with the desired encryption level, using the commands shown on the slide. (You need to interpret this. "Real time" and "aggregation" is about the "moment" when Fortigate sends the logs. However, no matter the moment, Fortigate will upload logs encrypted or unencrypted based on previous / differente config).
C) FortiAnalyzer_7.0_Study_Guide-Online.pdf page 147: Aggregation: Logs and content files stored and uploaded at scheduled time.
NEW QUESTION # 30
You have recently grouped multiple FortiGate devices into a single ADOM. System Settings > Storage Info shows the quota used.
What does the disk quota refer to?
- A. The maximum disk utilization for each device in the ADOM
- B. The maximum disk utilization for all devices in the ADOM
- C. The maximum disk utilization for the ADOM type
- D. The maximum disk utilization for the FortiAnalyzer model
Answer: B
NEW QUESTION # 31
An administrator has moved FortiGate A from the root ADOM to ADOM1.
Which two statements are true regarding logs? (Choose two.)
- A. Archived logs will be moved to ADOM1 from the root ADOM automatically.
- B. Logs will be presented in both ADOMs immediately after the move.
- C. Analytics logs will be moved to ADOM1 from the root ADOM after you rebuild the ADOM1 SQL database.
- D. Analytics logs will be moved to ADOM1 from the root ADOM automatically.
Answer: A,C
NEW QUESTION # 32
By default, what happens when a log file reaches its maximum file size?
- A. FortiAnalyzer forwards logs to syslog.
- B. FortiAnalyzer stops logging.
- C. FortiAnalyzer overwrites the log files.
- D. FortiAnalyzer rolls the active log by renaming the file.
Answer: D
NEW QUESTION # 33
......
Fortinet NSE5_FAZ-7.2 is an exam designed for professionals who want to validate their skills and knowledge in using Fortinet FortiAnalyzer 7.2. Fortinet NSE 5 - FortiAnalyzer 7.2 Analyst certification is intended for analysts who are responsible for monitoring and analyzing network traffic, generating reports, and making decisions based on the data collected by FortiAnalyzer. NSE5_FAZ-7.2 exam measures the knowledge of candidates in deploying, configuring, and managing FortiAnalyzer 7.2 in a network environment.
NSE 5 Network Security Analyst Free Certification Exam Material from Pass4cram with 138 Questions: https://validexam.pass4cram.com/NSE5_FAZ-7.2-dumps-torrent.html